
|
The PrimaRest® Advantage features a sculpted top layer with independent load-bearing cells that help reduce shear while creating airflow, for outstanding pressure redistribution, support and comfort. The 3 layer high density foam design provides 3 anatomic zones in the top layer and the super-soft sloped heel section helps to reduce pressure on the heels. The easy to clean premium all-way stretch cover comes standard optimum comfort & pressure redistribution. Firm foam perimeter prevents collapsing of the sidewalls to ease egress and ingress and reduce entrapment. Designed for high risk / Stage 1 & 2. Fire sleeve over the foam core to meet the strictest of Canada/USA fire and flame retardancy standards.
|
OVER-ALL LENGTH – 80”
OVER-ALL WIDTH – 35” or 42"
THICKNESS - 6” (8” with Raised Perimeter)
WEIGHT CAPACITY – 500lbs
WARRANTY – 7 Years on Core, 2 Years on Cover |
SPFPRIMRAD80
SPFPRIMRAD80SB
SPFPRIMRAD4280
SPFPRIMRAD4280SB
|
PRIMAREST® ADVANTAGE SUPPORT SURFACE, 35” x 80”
PRIMAREST® ADVANTAGE SUPPORT SURFACE w/RAISED PERIMETER, 35” x 80”
PRIMAREST® ADVANTAGE SUPPORT SURFACE, 42” x 80”
PRIMAREST® ADVANTAGE SUPPORT SURFACE w/RAISED PERIMETER, 42” x 80”
|
|
SPFPRIMCVR80
SPFPRIMCVR80SB
SPFPRIMCVR4280
SPFPRIMCVR4280SB
|
REPLACEMENT COVER FOR SPFPRIMRAD80, 35” x 80”
REPLACEMENT COVER FOR SPFPRIMRAD80SB w/RAISED PERIMETER, 35” x 80”
REPLACEMENT COVER FOR SPFPRIMRAD4280, 42” x 80”
REPLACEMENT COVER FOR SPFPRIMRAD4280SB w/RAISED PERIMETER, 42” x 80”
|
|
|
|
 |
 |
 |
Heel Zone
Softer foam material and sloping heel zone reduces pressure |
Fire Sleeve
Comes standard with a Fire Sleeve over the foam core |
Firm Perimeter
Firmer foam outer rim supports transfers and entrapment compliance |

The PrevaMatt Elite features double layered open cell foam with a viscoelastic memory foam top layer and higher density foam base. Thatched cuts in the top layer incorporate Surface Modification Technology (SMT™) which produces alterations in pattern, size of pattern, spacing between patterns and depth of cut to protect high risk areas. This results in zoned pressure redistribution with improved air circulation and maximized comfort. PrevaMatt Elite Incorporates a sloped heel section to redistribute pressure in the delicate heel and lower leg area. A 4” foam firm perimeter provides added stability during resident transfer and helps resident safety by reducing risk of entrapment between mattress and rails. Strategically located cuts in mattress base promote easier flexing during bed frame articulation which reduces wear and tear on mattress/cover and prolongs mattress life. The easy to clean cover comes standard in four way stretch material for optimum comfort & pressure redistribution. Available with optional Raised Perimeter. Designed for Prevention to Stage 2 use. Meets Canadian flame and fire retardant standards.
|
OVER-ALL LENGTH – 76”, 80” or 84”
OVER-ALL WIDTH – 35" or 42”
THICKNESS - 6” (8” with Raised Perimeter) WEIGHT CAPACITY – 500lbs
WARRANTY – 7 Years on Core, 1 Year on Cover |
SPFPREVAEL76
SPFPREVAEL80
SPFPREVAEL84
SPFPREVAEL4280
SPFPREVAEL76SB
SPFPREVAEL80SB
SPFPREVAEL84SB
SPFPREVAEVL4280SB |
PREVAMATT ELITE THERAPEUTIC SUPPORT SURFACE, 35” x 76”
PREVAMATT ELITE THERAPEUTIC SUPPORT SURFACE, 35” x 80”
PREVAMATT ELITETHERAPEUTIC SUPPORT SURFACE, 35” x 84”
PREVAMATT ELITE THERAPEUTIC SUPPORT SURFACE, 42” x 80”
PREVAMATT ELITE THERAPEUTIC SUPPORT SURFACE w/RAISED PERIMETER, 35” x 76”
PREVAMATT ELITE THERAPEUTIC SUPPORT SURFACE w/RAISED PERIMETER, 35” x 80”
PREVAMATT ELITE THERAPEUTIC SUPPORT SURFACE w/RAISED PERIMETER, 35” x 84”
PREVAMATT ELITE THERAPEUTIC SUPPORT SURFACE w/RAISED PERIMETER, 42” x 80” |
|
|
|
 |
 |
 |
Articulation Cuts
Allow the mattress to move with the bed frame |
Heel Zone
Softer foam material and sloping heel zone reduces pressure |
Firm Perimeter
Firmer foam outer rim supports transfers and entrapment compliance |

The PrimaGel Deluxe combines the comfort and pressure reduction of a foam therapeutic surface with the pressure relief and temperature regulation of gel. In this unique process our therapeutic foam core is covered with a 3/4” pillow top gel honeycomb topper in the torso and foot section to deliver unparalleled comfort, temperature control and wound prevention. The gel topper distributes the pressure more evenly over these regions resulting in better pressure interfaces. The honeycomb design of the gel allows for better temperature control around the sensitive pressure areas of the body. The PrimaGel Deluxe has an incorporated high density foam perimeter to aid in transfers as well as to prevent bed entrapment. The special Recovery-5® Stretch cover provides fluid protection as well as a softer feel and stretch compared to regular nylon covers.
- 3/4” pillow top gel honeycomb comfort topper in torso and foot sections regulates temperature reducing perspiration and provides immersion for pressure reduction as well as increased comfort
- Dual density foam core with sloped heel zone to relieve pressure in sensitive foot region
- Firm perimeter border Allows for easier transfers and a firm supportive edge to meet all bed entrapment guidelines
- Recovery-5® cover ensures the mattress is protected from fluid while still allowing maximum immersion with its stretch capabilities
|
OVER-ALL LENGTH – 80"
OVER-ALL WIDTH – 35", 42"
THICKNESS - 6"
WEIGHT CAPACITY – 500lbs
WARRANTY – 5 Years
|
SPFPRIMAGDX80
SPFPRIMAGDX4280 |
PRIMAGEL DELUXE GEL THERAPEUTIC SURFACE, 80"
PRIMA-GEL DELUXE GEL THERAPEUTIC SURFACE, 42” x 80” |

The PrimaGel Elite combines the comfort and pressure reduction of a foam therapeutic surface with the pressure relief and temperature regulation of gel. In the critical torso section of the PrimaGel Elite we incorporate a larger and deeper honeycomb gel design to provide maximum pressure relief and temperature control for Stage I-IV pressure ulcers. The sensitive heel section of the PrimaGel Elite is covered with a 3/4” pillow top gel honeycomb topper to deliver unparalleled comfort and wound prevention. The gel topper distributes the pressure more evenly over these regions resulting in better pressure interfaces. The honeycomb design of the gel allows for better temperature control around the sensitive pressure areas of the body. The Prima-Gel Elite has an incorporated high density foam perimeter to aid in transfers as well as to prevent bed entrapment. The special Recovery-5® Stretch cover provides fluid protection as well as a softer feel and stretch compared to regular nylon covers.
- Full Torso Section large honeycomb gel pad for maximum pressure relief, comfort and temperature control in critical pressure area of the mattress
- 3/4” pillow top gel honeycomb comfort topper in foot section provides immersion for pressure reduction as well as increased comfort
- Dual density foam core with sloped heel zone to relieve pressure in sensitive foot region
- Firm perimeter border Allows for easier transfers and a firm supportive edge to meet all bed entrapment guidelines
- Recovery-5® cover ensures the mattress is protected from fluid while still allowing maximum immersion with its stretch capabilities
|
OVER-ALL LENGTH – 80"
OVER-ALL WIDTH – 35", 42"
THICKNESS - 6"
WEIGHT CAPACITY – 500lbs
WARRANTY – 5 Years |
SPFPRIMAGEL80
SPFPRIMAGEL4280 |
PRIMAGEL ELITE GEL THERAPEUTIC SURFACE, 35" x 80"
PRIMAGEL ELITE GEL THERAPEUTIC SURFACE, 42" x 80" |

This versatile mattress operates as either a dynamic selfadjusting non-powered mattress, or with the optional pump, as an alternating pressure-powered mattress. Twelve 5” air cells dynamically adjust to the patient profile. Includes six anatomically designed pressure relief zones and a second layer of hi-resiliency foam with air channels to help reduce heat and moisture buildup while absorbing pressure on bony prominences. In the non-powered mode, the EqualizeAire is indicated for prevention through Stage II pressure ulcers. With the addition of an optional control unit and based on individual patient assessment, the EqualizeAire can be used for the treatment of uncomplicated Stage III or IV pressure ulcers. The chemical resistant ARMORGUARD cover maximizes the life of the mattress cover. Surrounding firm perimeter provides stability during patient care and contributes to patient safety by eliminating gaps between frames and siderails. Weight Capacity 500 lbs. Warranty of 5 years on the air cells and 1 year on the cover. |
• Gel-infused viscoelastic memory foam top layer for added comfort and pressure redistribution
• Second layer of hi-resiliency foam has air channels to help reduce heat and moisture buildup while relieving pressure on bony prominences
• Chemical-resistant ArmorGuard cover maximizes the life of the mattress cover
• Six anatomically designed zones provide pressure relief
• Twelve 5” air cells dynamically adjust to patient profile
• Optional pump can be added for alternating pressure therapy.
|
 |
OVER-ALL LENGTH - 80" |
OVER-ALL WIDTH - 35" |
THICKNESS - 7" |
• Pump is designed to add alternating therapy to EqualizeAire Plus mattresses to help prevent
pressure injuries through stage 4
• HEPA filter included
• Chemical-resistant ArmorGuard cover maximizes the life of the mattress cover
• Six anatomically designed zones provide pressure relief
• Twelve 5” air cells dynamically adjust to patient profile
• Optional pump can be added for alternating pressure therapy.
|
 |
Optional Pump SPFEQAIR-PMP |
SPFEQAIR80
SPFEQAIR4280
SPFEQAIR-PMP |
EQUALIZEAIRE THERAPY SURFACE, 35” x 80”
EQUALIZEAIRE THERAPY SURFACE, 42” x 80”
EQUALIZEAIRE CONTROL UNIT |

The P.R.O. Matt® Plus is a non-powered mattress replacement system featuring Pressure Redistribution Optimization (P.R.O.) Technology. With the addition of an optional control unit, the mattress provides powered immersion or alternating pressure therapy, allowing the use of one mattress for both pressure ulcer prevention and treatment. The unique P.R.O. Technology design requires no adjustments or manual inflation. The mattress features a sophisticated internal hosing and valve system that is invisible to the caregiver and patient, but enables the surface to automatically adjust to each patient’s weight and body profile. In the non-powered mode, the P.R.O. Matt Plus is indicated for prevention through Stage II pressure ulcers. With the addition of an optional control unit and based on individual patient assessment, the P.R.O. Matt Plus can be used for the treatment of uncomplicated Stage III or IV pressure ulcers. Maximum weight capacity 500lbs. Warranty: Five-years, non-prorated; Cover: One-year.
• Four-zone system (head, shoulder, torso and foot) inner air core reproduces the surface pressure
profile of a therapeutic low air loss mattress
• One-inch viscoelastic topper enhances pressure redistribution and patient comfort
• Surrounding firm perimeter provides stability during Patient care & Patient safety by eliminating gaps
between frames and siderails
• Horizontal air tubes are superior to other manufacturers vertical tubes as they provide better pressure relief
and do not kink if the bed is gatched
• Self-calibrating design needs no manual inflation
• Recovery-5® stretch cover is standard, waterproof and is a low friction and low shear surface
|
DIMENSIONS
COMFORT SETTINGS
CYCLE TIMES
MODES OF OPERATION
LOCKOUT |
12.4"w x 7.7"h x 4.3"d
5
5, 10, 15, 20 Minutes
Three - Autofirm, Alternating and Therapy
Yes |
 |
SPFPROMATT80
SPFPROMATT4280
SPFMP-CU-01 |
PROMATT PLUS CONVERTIBLE AIR SURFACE, 36" x 80"
PROMATT PLUS CONVERTIBLE AIR SURFACE, 42" x 80"
P.R.O. TECH AIR CONTROL UNIT |

|
|